OYSTAR USA
UltraClean - CIP
OYSTAR HÜTTLIN has made the CIP metal filter a viable solution. Metal filters with mycron meshed screens typically collect cleaning solution in the clean gas side. This can lead to long draining times in the cleaning cycle. Especially products prone to swelling amplify this problem. OYSTAR HÜTTLIN has come up with an ingenious solution: a metal filter that opens. An internal cone in the filter cartridge such as the one used in the proven dynamic filter is pushed downwards via a piston rod and the filter opens. This makes it possible to rinse away solids on the clean gas side of the filter quickly, thus reducing cleaning time significantly without compromising cleanliness.
5 Steps to Perfect Cleaning
CIP can be this easy when UltraClean (pat. pend.) is used
1. Preclean the product area and the metal filter
from the outside with the jet cleaner and blow
clear the metal filters with compressed air.
2. Clean the metal filters with the inside CIP
nozzles. This opens the metal filters.
3. Proceed with the main cleaning of the unit
using the jet cleaner and rotating spray
nozzles in the peripheral devices. Various
cleaning agents can be added to the warm
water during this process.
4. Rinse the entire unit and peripheral devices
with DI water as for the previous step. The
filters can alternately be cleaned from their
inside and outside.
5. Dry the unit with preheated process air
while the fi lter cartridges alternate
through an open and close cycle.
UltraClean Metal Filter - Fast CIP
You will find virtually every Process and Packaging solution and/or Machines for your requirements.